Add to favorites

Sterile filling of tubes by IWK

The entire design of the FP sterile platform serves to minimize risks when filling under sterile conditions. It meets all the necessary and relevant EDEHG and cGMP guidelines. Avoiding unsealed openings anywhere in the machine prevents cleaning agents and packaging material from reaching the filling area. Potential ‘dead spots’ in which residues or bacteria can accumulate and spread are eliminated and critical joins between components, in particular, have been optimized in this respect. All angles between adjacent parts and components are set at 90° or greater and have gapless seals that are approved for filling and cleaning.

There are no parts that could be ‘lost’ above the open tube and no surfaces that could be contaminated by particles or lubricants. All product contact parts are electropolished and have a surface finish of ≤ 0.8 μm as standard. Higher surface qualities are available on request.

Preventing dirt from building up around the system is also a priority. Where possible, electricity is connected via a cable channel in the hall floor. The bottom plate, the tube filler rack and the tube infeed are sealed against the hall floor by a skirt.

Sterile filling of tubes by IWK on manufacturer site

Contact information:

Vitalij Batyrev

Area Sales Director EECA IWK Verpackungstechnik GmbH

tel:	+49 7244 968 303
fax:	+49 7244 960 73
mobil:	+49 172 8454763
mail:	VBatyrev@iwk.de

www.iwk.de

Model description

Sterile filling of tubes by IWK

Catalogue

Brands

Sterile filling of tubes by IWK

Contact information:

Model description