Film Coating Machine REVESTA Developer

The tablet coating is the most significant procedure in the pharmaceutical industry, accounting for the last single-unit operation in which the tablets features can be modified. Said modification can be the result of either the application of a color coating, an isolation ensuring the stability of the components during the shelf life, a gastric acids resistant coating avoiding the degradation of acid sensitive actives, or a coating acting as a modulator of the active ingredient release. The coating can also be used as a procedure for the dosing of Active Pharmaceutical Ingredients (APIS) (quantitative coating).

All these possibilities can be effectively achieved only through a system or a film coating machine especially designed, and precisely implemented and customized.

BASICS

The tablet coating is the process of applying a suspension or solution, containing the components needed for the coating formation, on a moving bed of tablets, keeping a constant temperature in the bed. This constant temperature implies a dynamic balance, where the solvent of the applied liquid is at the same time evaporated and eliminated by extraction.

In practice, this balance is achieved by adjusting the following 5 critical variables of the process:

–    The applied liquid flow
–    The inlet air quality and flow
–    The exhaust air flow
–    The inlet air temperature and humidity
–    The pan speed

Film Coating Machine REVESTA Developer on manufacturer site

InterPharmTechnology® - representative of  COMASA in Russia and EAEU area

https://comasa-pharma.ift.ru/ 

http://www.ift.ru

Moscow, Godovikova st. 9

8 (495) 950-5665